Installation Kits

RCR-1 Copper (RCR-1-6, 6" extension)      RCR-2 Aluminum`     RCR-5  Rain Chain Doubler 

Used to reduce  large openings in gutter and funnel the water more efficiently.  Rain Chains for which these are recommended are marked with * on the price sheet; also recommended for custom lengths longer than 8 1/2 ft.  Installation kits require a hole of ~2 1/4" in the eaves trough  to insert the 2 1/8" O.D. spout.  RCR-1 and RCR-2 extend 3" down.

Accessories and Accents

 #3145   16" Hand Hammered Copper Catch Basin               

#3145 - AL    16" Hand Hammered Aluminum Catch Basin                                    

   #3145-A 16" Hand Hammered Copper Catch Basin with center loop

#3145-AL LOOP     16" Hand Hammered Aluminum Catch Basin with center loop

#3120 Hand Hammered Copper Basin

 #3141 Corner Leaderhead

Different views of Leaderhead

Without a gutter, water pours off the "valley" where two roofs join. If you don't have guttering there, consider this corner leaderhead to catch the water and direct it onto a rain chain. A beautiful way to solve a common drainage problem!

Crafted in pure, thick copper, our leaderhead comes with the following features:

• Designed to fit an inside 90-degree angle
• Comes with a removable brass screen in the top to let water in and keep debris out
• Comes with an outlet and bolt with nuts to easily hang a rain chain
• Has four (two per side) keyhole-style holes for easy installation
• Four copper screws included

Display

Display is 2 ft. long and holds 6 rain chains.  Note that the seams are not water tight since this is meant for display. Silicone can be added to the seams and around the inserts to make it water tight, if one wanted to hook a pump up and re-circulate water down the rain chains.  Suggest an 8 ft. rated pump and split the tubing inside the trough into 6 to accommodate each insert.

 outside

inside (reflection is misleading -- there are only 6 openings)